Solar panel kit 1-2 people
(direct absorption / heat pipe)
Price 1090 EURO + VAT (pick up Oradea or by courier)
Video solar panels with direct absorption and CPC insulated mirror
The description below corresponds in part to heat pipe and in part to direct absorption.
Pret Solar panel kit = 990euro + VAT
Assembly labor price (recommended price) = 280euro
Double stainless steel route, isolated with Dutch and communication cable = 10euro + VAT / ml
Travel (recommended price) = 0.5eur / km
Price for insulated mirror layer / tube = 5 euros + VAT / tube
SOLAR PANEL with 25 YEAR WARRANTY
| Buc | Product name Termocasa
|
|---|
| 1 |
Panel with 18/20 vacuum tubes SP 58 / 1800A-18 |
| 4 |
Stainless steel / Al support for fixing solar panels |
| 1 |
TMC double automation + 2 PT 1000 sensors |
| 1 |
Solar pump / station |
| 1 |
Overpressure valve / solenoid valve |
| 1 |
Expansion vessel-mounting bracket |
| 1 |
Pump / expansion vessel connection set / connection |
| 1 |
Minimum 10 liters of heating liquid (antifreeze - 40 ° C) |
| 1 |
Automatic aerator set completely resistant to 180 ° C |
| 1 |
150L Thermal Solar Electric Trivalent Boiler |
SOLAR PANELS - DIRECT ABSORPTION PRESSURIZED WITH CPC INSULATED MIRROR (ABSOLUTE NEW ON THE ROMANIAN MARKET)
Solar panels equipped with the new technology of pressurized direct absorption they produce thermal energy necessary for the production of domestic hot water and for the preparation of the thermal agent used for the contribution to the heating of the houses, public institutions, companies as well as to the heating of the swimming pools.
The main advantage of the new solar panels with direct absorption is the fact that the hot glycol comes into direct contact with the glass tubes and heat transfer is maximum, compared to heat pipe panels where heat transfer is done through several heat exchangers (tube of glass gives heat to the aluminum fins which in turn give heat to the heat pipe and then the heat is given to the collector in which the glycol is).
Due to the lack of elements that can be damaged, the panels with direct absorption benefit from a 25-year warranty that can be extended depending on the policy of each distributor.
The efficiency of direct absorption solar panels is up to 30% higher than heat pipe panels and up to 50% higher than flat panels. The solar panel will be mounted on the south side to benefit from maximum efficiency.
Solar panels equipped with the new technology of pressurized direct absorption si CPC insulated mirror represents the latest technology and the latest inventions and innovations in the field of solar panels. The CPC insulated mirror layer is applied directly to the back of the outer glass tube and helps to recover solar radiation from the sides of the inner tube that is normally lost and to stop heat loss through the shaded surface of the glass tube (back of the tube). During the summer, a simple twisting of the tubes can reduce or stop the operation of the solar panel by shading by the CPC insulated mirror, which is oriented towards the sun.
The advantages over the rest of the solutions on the market are:
- by attaching the CPC insulating mirror directly on the glass tube, it no longer allows the deposition of dust and impurities on the surface of the mirror, dust and impurities that block the solar radiation.
- by attaching the CPC insulating mirror directly on the outer glass tube and not on the inner one, it allows the blocking of heat losses through the shaded surface of the glass tube (behind the tube).
Extremely simple installation allows the installation of direct absorption panels by any authorized installer.
The expansion vessel ensures the condensation of the superheated glycol and its reintroduction into the circuit, eliminating the risk of evaporation.
These types of solar panels together with a solar boiler and an automation station, create a complex solar system that works all year round (regardless of the temperature of the external environment). The solar system can be connected to any type of thermal installation that exists in the building.
The constructive variants are:
- 18 tubes, product code TMC18 1.55mX1.85m
- 25 tubes, product code TMC25 2.15mX1.85m
- 30 tubes, product code TMC30 2.55mX1.85m
The solar panel is composed of:
- Vacuum glass tubes;
- Horizontal heat exchanger;
- Duralumin / stainless steel mounting bracket;
- Expansion tank ;
- Fasteners, accessories, screws, nuts, silicone gasket and rubber, etc.
- The glass tubes have a construction with double walls, of thermos type, having the vacuum level between the glass walls of 5 × 10-3 bar.
The outer tube has a diameter of 58 mm and a length of 1800 mm.
The glass tube inside is covered with two selective layers, one layer is of the Al-N-Al type which has the role of increasing the level of absorption of infrared radiation from the visible range of solar radiation up to 95%. The second layer has the role of refracting the thermal radiation inside the tube in order to be taken over by the thermal agent. and thus produce up to 810kw / h / sqm/ an.
The glass used for the manufacture of tubes is of borisilicate type 3.3 being resistant to hail.
Glass tubes have a very important role in the operation of the solar panel, they perform the following functions:
- they absorb infrared radiation from the visible range of sunlight
- refracts the thermal radiation to the inside of the glass tube until it is taken up by the thermal agent
- insulates very well the thermal system of absorption of infrared radiation from the external environment
Inside the glass tubes, the thermal agent that takes the solar thermal radiation and transforms it into thermal energy even if the sky is covered by clouds.
The position of the vacuum glass tubes on the support of the solar panels is always inclined, which makes it a high resistance to impact with hail and on the other hand the thermal agent with the highest temperature to be continuously at the top due the phenomenon of radiator heating the heat agent in the heat exchanger.
The heat exchanger is made of stainless steel and has the role of taking over the thermal energy made by the solar panel tubes. The exchanger housing is 2 mm thick and is made of stainless steel resistant to harsh conditions imposed by the external environment. The thermal insulation of the heat exchanger is made of high density polyurethane with a thickness of 50 - 60 mm, insulation which, in addition to having the lowest heat transfer coefficient with the outside, also has the role of increasing the mechanical resistance of the equipment.
Due to the large capacity of the heat collector, direct absorption panel systems have very small hydraulic losses so they can be dimensioned in groups of up to 200 pipes / installation and are not limited to 120 pipes / installation as in the case of heat pipe panels.
The inlet and outlet of the heat exchanger is made of 22/28 mm diameter pipe. The connection with the external equipment is made by means of a detachable elastic connector, it takes over the expansion and displacement due to the expansion.
The support of the solar panel is made of duralumin / stainless steel U-type profiles which give it mechanical resistance and corrosion resistance. The thickness of the profile, the shape, the structure, the way of fixing gives the solar panel stability in difficult atmospheric conditions (strong wind, deposition of a thick layer of snow, etc.)
The angle of inclination of the support can be 20 ° - 90 °.
The solar panel works all year round, regardless of the temperature of the outdoor environment. There is no danger of frost during operation because glycol is used in the circuit of the solar system, which withstands up to -40 ° C. To reduce heat loss on the connecting pipes, it is insulated with materials resistant to high temperatures.
Solar panels comply with all the requirements imposed by national and international legislation and the conditions imposed by environmental standards. Using solar panels on each building reduces fuel consumption and does not eliminate significant amounts of emissions of pollutants into the atmosphere, especially CO².
Who is TERMOCASA ?
Termocasa it is not just a company, it is a Group of companies that collaborate in the development and production of equipment and technologies contributing significantly to environmental protection.
Our philosophy is represented by the development of Romania, which is why we try to outsource most of the production of Heat Pumps and Solar Panels, thus involving as many Romanians as possible in the activity of production, sale and distribution.
Each product marketed by TERMOCASA encompasses the work and effort of more than 10 authorized companies, sole proprietorships or natural persons and more than 50 Romanian who do their best to make better and more competitive products than the competition.
Given that we have more than 10 years experience, all products Termocasa it benefits from a special assistance to the client and unparalleled performance and we consider that we have done, do and will do everything we can so that no client is dissatisfied, because the best advertisement is the satisfied customers.
Can we help you? 